Question: ACI code for evaluating existing buildings prior to repair

Question: Shear Design Provisions in ACI 318-19

Question: Size of test cylinder

Question: Standards for 7-day and 28-day strength test results

Question: What nominal maximum sizes of aggregate are recommended?

Question: The intent of the 0.8 factor in Section 17.7.1.2.1 of ACI 318-19

Question: Low-strength cylinder test results

Question: Mixture design and strength submittals

Question: Acceptable concrete cracking

Question: What is the intention of the ACI 318 Building Code?

Question: Could a sulfate-resisting cement and slag cement be combined and used for concrete exposed to su...

Question: Consolidation of concrete—required or not?

Question: Design of Slabs-on-ground

Question: Slabs-on-ground

Question: The importance of concrete cover

Question: How is the required strength selected, measured, and obtained?

Question: Load factors used in the 1963 building code

Question: Simplified design for reinforced concrete buildings

Question: Two-way slabs design, ACI 318 vs. FEM

Question: Curing Cylinders for Acceptance Testing

Question: Definition of shallow and deep foundations

Question: Precautions against sulfate attack

Question: Epoxy-coated reinforcement and cover depth against ground

Question: Using cube tests in lieu of cylinder tests

Question: Minimum thickness of bearing walls

Question: Shear reinforcement for beam-column connections

Question: Using core strength to calculate compressive strength of an existing structure

Question: The most important single factor affecting compressive strength

Question: Are load tests on completed structures ever employed?

Question: Guidance on designing reinforced concrete retaining walls

Question: Design Properties of Lightweight Concrete

Question: Minimum concrete cover for balconies with PT cables

Question: Evaluating the properties of hardened concrete

Question: Epoxy-coated reinforcement

Question: Chloride concentration in soil and exposure classes

Question: Requirements for a successful concrete structure

Question: What is reinforced concrete?

Question: Who selects the requirements for concrete for a project?

Question: What procedure should be followed for standard curing of specimens for strength tests?

Question: Punching shear check for shear wall foundations

Question: Knowledge of concrete properties

Question: The importance of reinforcement in concrete

Question: Reinforced concrete vs. prestressed concrete